USA INDUSTRIALS Metal Pipe Straight: 1 1/2 in x 1 in, Threaded x Threaded, Class 150, 150 psi
The USA INDUSTRIALS Metal Pipe Straight is a low-pressure threaded pipe fitting, 1 1/2 in x 1 in, Class 150, with a maximum operating pressure of 150 psi. It features a threaded x threaded straight configuration and…
SKU 3G-OTH-478128
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Metal Pipe Straight is a low-pressure threaded pipe fitting, 1 1/2 in x 1 in, Class 150, with a maximum operating pressure of 150 psi. It features a threaded x threaded straight configuration and includes PTFE thread sealant.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the USA INDUSTRIALS Metal Pipe Straight used for?
This low-pressure threaded pipe fitting connects two pipes of different sizes (1 1/2 in x 1 in) in a straight line. It is suitable for industrial plumbing, HVAC, and process systems operating up to 150 psi, with PTFE thread sealant included for leak-proof joints.
What are the specifications of the USA INDUSTRIALS Metal Pipe Straight?
The fitting is a threaded x threaded straight reducer, Class 150, with a maximum operating pressure of 150 psi. It comes with PTFE thread sealant and is manufactured by USA INDUSTRIALS under part number ZUSA-PF-23192. The larger end is 1 1/2 in, the smaller is 1 in.
Where to buy the USA INDUSTRIALS Metal Pipe Straight worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS Metal Pipe Straight worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever it is located.
How to install the USA INDUSTRIALS Metal Pipe Straight?
Apply additional PTFE tape or pipe dope to the male threads if needed, then hand-tighten the fitting onto both pipe ends. Use a wrench for final snugging—avoid overtightening to prevent cracking. Always depressurize the system before installation and test for leaks at 150 psi maximum.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
