USA INDUSTRIALS Metal Pipe Straight: 1/2 in x 1/4 in, Threaded x Threaded, Class 150, 150 psi
The USA INDUSTRIALS Metal Pipe Straight is a low-pressure threaded pipe fitting (1/2 in x 1/4 in, Threaded x Threaded, Class 150) with a maximum operating pressure of 150 psi and PTFE thread sealant. 3G Electric…
SKU 3G-OTH-478144
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Metal Pipe Straight is a low-pressure threaded pipe fitting (1/2 in x 1/4 in, Threaded x Threaded, Class 150) with a maximum operating pressure of 150 psi and PTFE thread sealant. 3G Electric interprets this demand and delivers it across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor for brands like Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump and FBR.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the USA INDUSTRIALS Metal Pipe Straight used for?
This low-pressure threaded pipe fitting connects and redirects piping in industrial systems up to 150 psi. It is commonly used in water, air, and non-corrosive fluid lines where a straight reducer from 1/2 in to 1/4 in is needed.
What are the specifications of the USA INDUSTRIALS Metal Pipe Straight?
The fitting is a Threaded x Threaded, Class 150, straight reducer with a maximum operating pressure of 150 psi. It includes PTFE thread sealant and measures 1/2 in x 1/4 in. The manufacturer part number is ZUSA-PF-23190.
Where to buy the USA INDUSTRIALS Metal Pipe Straight worldwide?
3G Electric supplies this USA INDUSTRIALS fitting worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-23190 for your application.
How to install the USA INDUSTRIALS Metal Pipe Straight?
Apply pipe thread sealant (PTFE tape or compound) to male threads, hand-tighten the fitting, then use wrenches on both sides to snug it without over-torquing. Avoid overtightening to prevent cracking the Class 150 fitting.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
