USA INDUSTRIALS Metal Pipe Elbow: 1 1/4 in x 1 1/4 in, Threaded x Threaded, Class 150, 150 psi
The USA INDUSTRIALS Metal Pipe Elbow (SKU 407KL4) is a 90° low-pressure threaded pipe fitting with a 1 1/4 in x 1 1/4 in size, Class 150 rating, and a maximum operating pressure of 150 psi. It features a threaded x…
SKU 3G-OTH-478131
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Metal Pipe Elbow (SKU 407KL4) is a 90° low-pressure threaded pipe fitting with a 1 1/4 in x 1 1/4 in size, Class 150 rating, and a maximum operating pressure of 150 psi. It features a threaded x threaded connection with PTFE thread sealant applied, ensuring a reliable seal in industrial piping systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Metal Pipe Elbow used for?
This 90° elbow connects two pipes at a right angle in low-pressure industrial piping systems. It is suitable for applications up to 150 psi, such as water, air, or non-corrosive fluid lines, where a reliable threaded joint with PTFE sealant is required.
What are the specifications of the USA INDUSTRIALS Metal Pipe Elbow?
The USA INDUSTRIALS Metal Pipe Elbow (MPN ZUSA-PF-23219) is a 1 1/4 in x 1 1/4 in, threaded x threaded, Class 150 fitting with a maximum operating pressure of 150 psi. It features a 90° elbow design and PTFE thread sealant applied for leak prevention.
Where to buy USA INDUSTRIALS Metal Pipe Elbow worldwide?
3G Electric supplies the USA INDUSTRIALS Metal Pipe Elbow (SKU 407KL4) to customers worldwide. We handle full logistics, customs clearance, and delivery, ensuring you receive genuine industrial fittings for your piping needs, regardless of your location.
How to install a threaded pipe elbow with PTFE sealant?
Clean the male threads, apply PTFE tape or paste evenly in the direction of threading, then hand-tighten the elbow onto the pipe. Use a wrench for final snugging—avoid overtightening to prevent cracking. Test the joint at operating pressure to verify a leak-free seal.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
