USA INDUSTRIALS Plug: 3/4 in, Threaded, Class 150, 150 psi @ 72°F, Plug
3G Electric supplies the USA INDUSTRIALS 3/4 in Threaded Class 150 Plug, a low-pressure threaded pipe fitting made of malleable iron. This plug is rated for a maximum operating pressure of 150 psi at 72°F, meeting…
SKU 3G-OTH-478165
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
3G Electric supplies the USA INDUSTRIALS 3/4 in Threaded Class 150 Plug, a low-pressure threaded pipe fitting made of malleable iron. This plug is rated for a maximum operating pressure of 150 psi at 72°F, meeting Class 150 specifications for reliable sealing in industrial piping systems.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the USA INDUSTRIALS 3/4 in threaded plug used for?
This malleable iron plug seals low-pressure threaded pipe openings in industrial piping systems. Rated Class 150 at 150 psi @ 72°F, it is commonly used in water, air, and steam lines where a reliable, leak-resistant closure is needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23065 plug?
The plug is 3/4 in, threaded, Class 150, made of malleable iron. Maximum operating pressure is 150 psi @ 72°F. The manufacturer part number is ZUSA-PF-23065. It is a low-pressure threaded pipe fitting with thread sealant.
Where to buy USA INDUSTRIALS pipe fittings in worldwide?
3G Electric supplies the USA INDUSTRIALS 3/4 in threaded plug and other pipe fittings to customers worldwide. We handle full logistics, customs clearance, and delivery to your site, ensuring you get the right industrial components for your application.
How to install a threaded pipe plug correctly?
Clean the pipe threads and apply a compatible thread sealant or PTFE tape. Hand-tighten the plug, then use a wrench for an additional 1-2 turns. Avoid overtightening to prevent cracking the malleable iron. Test the joint at operating pressure to confirm a leak-free seal.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
