USA INDUSTRIALS Plug: 1/2 in, Threaded, Class 150, 150 psi @ 72°F, Plug
The USA INDUSTRIALS Plug is a 1/2 in, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for 150 psi @ 72°F. This threaded plug is designed for use in industrial piping systems requiring a…
SKU 3G-OTH-478166
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Plug is a 1/2 in, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for 150 psi @ 72°F. This threaded plug is designed for use in industrial piping systems requiring a reliable seal at moderate pressures.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS threaded plug used for?
This 1/2 in, Class 150 malleable iron plug seals threaded openings in low-pressure industrial piping systems. It is rated for 150 psi @ 72°F and is commonly used in water, air, and steam lines where a reliable, leak-resistant closure is needed.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23064 plug?
The USA INDUSTRIALS ZUSA-PF-23064 is a 1/2 in threaded plug, Class 150, made of malleable iron. Its maximum operating pressure is 150 psi @ 72°F. It is a low-pressure threaded pipe fitting designed for industrial piping systems.
Where to buy USA INDUSTRIALS pipe fittings worldwide?
3G Electric supplies USA INDUSTRIALS pipe fittings worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on the ZUSA-PF-23064 plug or any other industrial fitting you need.
How to install a threaded pipe plug correctly?
Clean the male threads and apply a compatible thread sealant or PTFE tape. Hand-tighten the plug into the female fitting, then use a wrench for a final 1/4 to 1/2 turn. Do not overtighten, as malleable iron can crack. Test the joint at operating pressure.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
