USA INDUSTRIALS Cap: 2 in, Threaded, Class 150, 150 psi @ 72°F, Cap
The USA INDUSTRIALS Cap is a 2-inch, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 150 psi at 72°F. This cap is supplied with thread sealant and is…
SKU 3G-OTH-478170
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Cap is a 2-inch, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 150 psi at 72°F. This cap is supplied with thread sealant and is part of our threaded pipe fittings category, available through 3G Electric's global sourcing across 14 industrial departments.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 2-inch threaded pipe cap used for?
This malleable iron cap seals the end of a 2-inch threaded pipe in low-pressure systems up to 150 psi at 72°F. It is commonly used in water, air, and steam lines across industrial plants, HVAC, and plumbing applications. 3G Electric supplies this fitting globally.
What are the specifications of the USA INDUSTRIALS cap ZUSA-PF-23060?
The cap is 2 inches, threaded, Class 150, with a maximum operating pressure of 150 psi at 72°F. It is made of malleable iron and comes with thread sealant applied. The manufacturer part number is ZUSA-PF-23060.
Where to buy a USA INDUSTRIALS threaded pipe cap worldwide?
3G Electric sources and delivers the USA INDUSTRIALS cap (ZUSA-PF-23060) to worldwide locations. We handle full logistics and customs clearance as a global industrial supplier across 14 departments, including pipe fittings. Contact us for availability and delivery.
How to install a threaded pipe cap with thread sealant?
Clean the male pipe threads, then apply additional sealant if needed. Hand-tighten the cap onto the pipe, then use a wrench for a final quarter turn. Do not overtighten, as malleable iron can crack. Always follow the manufacturer's pressure and temperature limits.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
