USA INDUSTRIALS Cap: 1 in, Threaded, Class 150, 150 psi @ 72°F, Cap
The USA INDUSTRIALS Cap is a 1-inch, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 150 psi at 72°F. This cap is supplied with thread sealant for…
SKU 3G-OTH-478173
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Cap is a 1-inch, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for a maximum operating pressure of 150 psi at 72°F. This cap is supplied with thread sealant for secure installation.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 1-inch threaded pipe cap used for?
This malleable iron cap seals the end of a 1-inch threaded pipe in low-pressure systems up to 150 psi at 72°F. It is commonly used in plumbing, HVAC, and industrial piping to close off lines for maintenance or system modifications.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23057 cap?
The cap is 1-inch threaded, Class 150, made of malleable iron, with a maximum operating pressure of 150 psi at 72°F. It includes thread sealant for a secure fit. The manufacturer part number is ZUSA-PF-23057.
Where to buy USA INDUSTRIALS pipe fittings in worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe fittings worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order arrives at your facility, wherever you are located.
How to install a threaded pipe cap with sealant?
Clean the pipe threads, apply the pre-applied sealant evenly, then hand-tighten the cap onto the pipe. Use a wrench for final snugging—avoid overtightening to prevent cracking the malleable iron. Test the joint at system pressure to confirm no leaks.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
