USA INDUSTRIALS Cap: 1/4 in, Threaded, Class 150, 150 psi @ 72°F, Cap
The USA INDUSTRIALS Cap is a 1/4 in, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for 150 psi at 72°F. It is supplied with thread sealant for secure installation.
SKU 3G-OTH-478186
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Cap is a 1/4 in, threaded, Class 150 low-pressure pipe fitting made of malleable iron, rated for 150 psi at 72°F. It is supplied with thread sealant for secure installation.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 1/4 in threaded cap used for?
This USA INDUSTRIALS cap seals the end of a 1/4 in threaded pipe in low-pressure systems up to 150 psi at 72°F. It is commonly used in water, air, or steam lines where a durable, leak-proof closure is needed. The malleable iron construction provides strength and corrosion resistance.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23053 cap?
The USA INDUSTRIALS cap (MPN ZUSA-PF-23053) is a 1/4 in threaded, Class 150 fitting made of malleable iron. It has a maximum operating pressure of 150 psi at 72°F and comes with thread sealant pre-applied for secure installation. It is designed for low-pressure pipe systems.
Where to buy USA INDUSTRIALS pipe fittings in worldwide?
3G Electric supplies USA INDUSTRIALS pipe fittings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-23053 cap or any other USA INDUSTRIALS fitting for your project.
How to install a threaded pipe cap with sealant?
Clean the male pipe threads thoroughly. Apply the pre-applied thread sealant evenly, or use additional sealant if needed. Hand-tighten the cap onto the pipe, then use a wrench for a final quarter turn. Do not overtighten, as malleable iron can crack. Test the joint at operating pressure to verify the seal.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
