USA INDUSTRIALS Plug: Plug, 150 psi @ 72°F, 1/2 in, NPT Threaded
The USA INDUSTRIALS Plug is a low-pressure threaded pipe fitting made of malleable iron with a 1/2-inch NPT thread and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 150 psi at 72°F…
SKU 3G-OTH-467718
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Plug is a low-pressure threaded pipe fitting made of malleable iron with a 1/2-inch NPT thread and pre-applied PTFE thread sealant. It is rated for a maximum operating pressure of 150 psi at 72°F (MPN ZUSA-PF-23265).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the USA INDUSTRIALS Plug ZUSA-PF-23265 used for?
This malleable iron plug seals the end of a low-pressure threaded pipe system. It is commonly used in industrial plumbing, pneumatic lines, and hydraulic circuits where a 1/2-inch NPT port needs a secure, leak-resistant closure rated to 150 psi at 72°F.
What are the specifications of the USA INDUSTRIALS Plug ZUSA-PF-23265?
The plug is 1/2-inch NPT threaded, made of malleable iron, and rated for a maximum operating pressure of 150 psi at 72°F. It comes with pre-applied PTFE thread sealant. The manufacturer part number is ZUSA-PF-23265, and the brand is USA INDUSTRIALS.
Where to buy the USA INDUSTRIALS Plug ZUSA-PF-23265 worldwide?
3G Electric supplies the USA INDUSTRIALS Plug ZUSA-PF-23265 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this low-pressure threaded pipe fitting.
How to install the USA INDUSTRIALS Plug ZUSA-PF-23265?
Clean the female NPT port threads, then hand-tighten the plug until snug. Use a wrench for final tightening—avoid over-torquing malleable iron. The pre-applied PTFE sealant eliminates the need for additional tape or compound. Test the joint at operating pressure before service.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
