USA INDUSTRIALS Plug: Plug, 150 psi @ 72°F, 1/8 in, NPT Threaded
The USA INDUSTRIALS Plug is a low-pressure threaded pipe fitting made of malleable iron with a 1/8 in NPT thread and a maximum operating pressure of 150 psi @ 72°F. It includes PTFE thread sealant for reliable…
SKU 3G-OTH-467721
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Plug is a low-pressure threaded pipe fitting made of malleable iron with a 1/8 in NPT thread and a maximum operating pressure of 150 psi @ 72°F. It includes PTFE thread sealant for reliable sealing. 3G Electric interprets customer demand and delivers this genuine industrial component across 14 departments — and far more — with specialist depth in combustion, pumps and controls as an authorised distributor for brands like Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump and FBR.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the USA INDUSTRIALS Plug ZUSA-PF-23267 used for?
The USA INDUSTRIALS Plug is a low-pressure threaded pipe fitting used to seal the end of a pipe in pneumatic, hydraulic, or fluid systems. Its 1/8 in NPT thread and malleable iron construction suit applications up to 150 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS Plug ZUSA-PF-23267?
The plug has a maximum operating pressure of 150 psi @ 72°F, a 1/8 in NPT thread, and is made of malleable iron. It includes PTFE thread sealant for reliable sealing. The manufacturer part number is ZUSA-PF-23267 from USA INDUSTRIALS.
Where to buy the USA INDUSTRIALS Plug ZUSA-PF-23267 worldwide?
3G Electric supplies the USA INDUSTRIALS Plug ZUSA-PF-23267 worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to deliver this genuine component to your facility, no matter the location.
How to install the USA INDUSTRIALS Plug with PTFE sealant?
Apply the pre-applied PTFE thread sealant evenly on the male NPT threads. Hand-tighten the plug into the female fitting, then use a wrench for an additional 1-2 turns. Do not overtighten to avoid cracking the malleable iron. Test at 150 psi @ 72°F.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
