USA INDUSTRIALS Plug: Plug, 150 psi @ 72°F, 1 in, NPT Threaded
The USA INDUSTRIALS Plug is a low-pressure threaded pipe fitting, type 150 psi @ 72°F, 1 in, NPT Threaded, Malleable Iron, with PTFE thread sealant. It has a maximum operating pressure of 150 psi @ 72 °F.
SKU 3G-OTH-467725
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Plug is a low-pressure threaded pipe fitting, type 150 psi @ 72°F, 1 in, NPT Threaded, Malleable Iron, with PTFE thread sealant. It has a maximum operating pressure of 150 psi @ 72 °F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the USA INDUSTRIALS Plug ZUSA-PF-23255 used for?
This USA INDUSTRIALS plug seals the end of a threaded pipe in low-pressure systems up to 150 psi @ 72 °F. It is commonly used in air, water, and oil lines where a reliable, leak-free closure is needed. The malleable iron body and PTFE thread sealant provide a durable, corrosion-resistant seal.
What are the specifications of the USA INDUSTRIALS Plug ZUSA-PF-23255?
The USA INDUSTRIALS Plug is a 1 in NPT threaded fitting made of malleable iron. It has a maximum operating pressure of 150 psi @ 72 °F and includes PTFE thread sealant. The manufacturer part number is ZUSA-PF-23255. It is designed for low-pressure threaded pipe fitting applications.
Where to buy the USA INDUSTRIALS Plug ZUSA-PF-23255 worldwide?
3G Electric supplies the USA INDUSTRIALS Plug ZUSA-PF-23255 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver this low-pressure threaded pipe fitting to meet your project requirements.
How to install the USA INDUSTRIALS Plug ZUSA-PF-23255?
Apply pipe thread sealant (PTFE tape or compound) to the male threads of the plug. Hand-tighten into the female fitting, then use a wrench for an additional 1–2 turns. Do not overtighten, as malleable iron can crack. Test the joint at operating pressure up to 150 psi @ 72 °F to verify a leak-free seal.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
