USA INDUSTRIALS Metal Pipe Elbow: 90° Elbow, 150 psi, 1/4 in x 1/4 in
The USA INDUSTRIALS Metal Pipe Elbow is a 90° low-pressure threaded pipe fitting made of malleable iron, with a 1/4 in x 1/4 in size and a maximum operating pressure of 150 psi. It includes PTFE thread sealant for…
SKU 3G-OTH-467760
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Metal Pipe Elbow is a 90° low-pressure threaded pipe fitting made of malleable iron, with a 1/4 in x 1/4 in size and a maximum operating pressure of 150 psi. It includes PTFE thread sealant for leak-resistant connections. 3G Electric interprets customer demand and delivers this fitting across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS 90° pipe elbow used for?
This 90° elbow redirects fluid or air flow in low-pressure piping systems. It is commonly used in industrial plumbing, pneumatic lines, and hydraulic circuits where a 1/4 in connection and 150 psi maximum operating pressure are required.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-23279 elbow?
This is a 90° elbow with 1/4 in x 1/4 in female threads, made of malleable iron. It has a maximum operating pressure of 150 psi and includes PTFE thread sealant for leak-resistant joints. The manufacturer part number is ZUSA-PF-23279.
Where to buy USA INDUSTRIALS pipe fittings in worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe fittings worldwide. We handle full logistics and customs clearance, ensuring your order reaches any global destination. Contact us to source this 90° elbow or any other industrial fitting you need.
How to install a USA INDUSTRIALS malleable iron elbow?
Apply the included PTFE thread sealant to male threads before assembly. Hand-tighten the elbow, then use a wrench for an additional 1-2 turns. Avoid over-tightening to prevent cracking the malleable iron. Always verify the system is depressurized before installation.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS low-pressure threaded pipe fittings with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
