FBR X FGP 44.22 LX TL SI

LIGHT-OIL BURNERS AT TWO STEPS SK070101_A_en PRESSURE (LX SERIES) FGP 44.22-LX - FGP 55.22-LX Light-oil burners at two steps pressure - Low NOx (NOx < 120 mg/kWh). Composed by: die-cast aluminum body, fan at high pressurisation and combustion head with adjustment at high efficiency and high flame stability Compact overall dimensions and disposition rationalized of the components with accessibility facilitated for the operations of setting and maintenance.. Complete of nozzle, flange and gasket for installation on generator, flexible pipes, line filter. Fig. FGP 44.22-LX Fig. FGP 55.22-LX FGP 44.22-LX - FGP 55.22-LX  LIGHT-OIL BURNERS AT TWO STEPS PRESSURE (LX SERIES) SK070101_A_en TECHNICAL DATA MODEL FGP 44.22-LX Flow min.1°st. / min. 2°st. - max. 2°st. * [kg/h] 14.4/20-44 Thermal power min.1°st. / min. 2°st. - max. 2°st. * [Mcal/h] 147/204-450 Thermal power min.1°st. / min. 2°st. - max. 2°st. * [kW] 171/237-522 Fuel: LIGHT-OIL 1.5°E at 20°C = 6.2 cSt = 35 sec Redwood N°1 NOx ** [mg/kWh] < 120:class 3 (EN267) Intermitted working operation (min. 1 stop every 24 hours) two steps pressure Environmental conditions operation / storage: -15...+40°C / -20...+70°C, rel. humidity max. 80% Max. temperature combustion air [°C] 60 Nominal electric power [kW] 1.1 Fan motor [kW] 0.74 Nominal current absorption [A] 2 Power supply: 3~400V, 1N~230V - 50Hz Electric protection degree: IP 40 Noisiness min. - max. *** [dBA] 77 *Reference conditions: Environment temperature 20°C - Barometric pressure 1013 mbars - Altitude 0 metre (sea level). ** To obtain the NOx emissions as low as declared, it will be necessary to couple the burner to boilers suitable for this purpose: three-pass boilers, condensing boilers and any direct exhaust generator with a thermal load no higher than 1.1 MW/m³. *** Measured sonourous pressure in the combustion lab, with funcional burner on beta boiler in a distance of 1 m (UNI EN ISO 3746). OPERATING RANGE DIAGRAM FGP 44.22-LX [mbar] 13 11 9 7 5 3 1 -1 0 100 200 300 400 500 600 700 [kW] Fig. X฀=฀Thermal power฀Y฀=฀Pression in the combustion chamber The firing rates has been obtained based on test boilers in accordance with EN267 standards and are indicative of matching the burner to the boiler. For the correct operation of the burner, combustion chamber dimensions must be in accordance with current regulation. In case of non- compliance, contact the manufacturer. FGP 44.22-LX - FGP 55.22-LX  LIGHT-OIL BURNERS AT TWO STEPS SK070101_A_en PRESSURE (LX SERIES) TECHNICAL DATA MODEL FGP 55.22-LX Flow min.1°st. / min. 2°st. - max. 2°st. * [kg/h] 23.4/30-55 Thermal power min.1°st. / min. 2°st. - max. 2°st. * [Mcal/h] 239/306-561 Thermal power min.1°st. / min. 2°st. - max. 2°st. * [kW] 277/355-652 Fuel: LIGHT-OIL 1.5°E at 20°C = 6.2 cSt = 35 sec Redwood N°1 NOx ** [mg/kWh] < 120:class 3 (EN267) Intermitted working operation (min. 1 stop every 24 hours) two steps pressure Environmental conditions operation / storage: -15...+40°C / -20...+70°C, rel. humidity max. 80% Max. temperature combustion air [°C] 60 Nominal electric power [kW] 1.7 Fan motor [kW] 1.5 Nominal current absorption [A] 3 Alimentazione elettrica: 3~400V, 1N~230V - 50Hz Power supply: IP 40 Noisiness min. - max. *** [dBA] 78 Burner weight **** [kg] 52 *Reference conditions: Environment temperature 20°C - Barometric pressure 1013 mbars - Altitude 0 metre (sea level). ** To obtain the NOx emissions as low as declared, it will be necessary to couple the burner to boilers suitable for this purpose: three-pass boilers, condensing boilers and any direct exhaust generator with a thermal load no higher than 1.1 MW/m³. *** Measured sonourous pressure in the combustion lab, with funcional burner on beta boiler in a distance of 1 m (UNI EN ISO 3746). **** Only for burner FGP 55.22-LX TL version. OPERATING RANGE DIAGRAM FGP 55.22-LX [mbar] 13 11 9 7 5 3 1 -1 0 100 200 300 400 500 600 700 [kW] Fig. X฀=฀Thermal power฀Y฀=฀Pression in the combustion chamber The firing rates has been obtained based on test boilers in accordance with EN267 standards and are indicative of matching the burner to the boiler. For the correct operation of the burner, combustion chamber dimensions must be in accordance with current regulation. In case of non- compliance, contact the manufacturer. FGP 44.22-LX - FGP 55.22-LX  LIGHT-OIL BURNERS AT TWO STEPS SK070101_A_en PRESSURE (LX SERIES) DIMENSIONS [MM] I F H D G E A B TC - TL* C Fig. Dimensions฀FGP 44.22-LX MODEL A B C D E F G H I FGP 44.22-LX 187 330 557 130 416 100 23 200 207 * See "flame tube length" DIMENSIONS [MM] TL* Fig. Dimensions฀FGP 55.22-LX MODEL A B C D E F G FGP 55.22-LX 187 362 170 160 623 416 18 * See "flame tube length" FGP 44.22-LX - FGP 55.22-LX  LIGHT-OIL BURNERS AT TWO STEPS SK070101_A_en PRESSURE (LX SERIES) BOILER PLATE * Suggested dimension of connection between burner and generator. Fig. Boiler plate MODEL L min L max M N min N* N max FGP 44.22-LX mm 205 226 M10 160 160 180 FGP 55.22-LX mm 310 368 M12 170 180 250 FLAME TUBE LENGTH Flame tube length must be selected based on the specifications supplied by boiler manufacturer and, in any case, it must be greater than the thickness of the boiler door included its insulation. In case of boilers with flame inversion or front flue combustion chambers, it is necessary to insulate the area between the flame tube and front door with refractory material. This protection material must not impede flame tube extraction. MODEL TC TL ** FGP 44.22-LX mm 288 373 FGP 55.22-LX mm 238 323 ** For different flame lengths, please contact our Technical-Sales Department. FGP 44.22-LX - FGP 55.22-LX  LIGHT-OIL BURNERS AT TWO STEPS SK070101_A_en PRESSURE (LX SERIES) BURNER SIGNAL DESCRIPTION In the picture below there are indicated all the signalation present on the burner: 2 1 Fig. Burner…