Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO Corrosion-Resistant Stainless Steel Clevis Fork Joint - Corrosion-Resistant Stainless Steel Clevis Fork Joints
JW WINCOCorrosion-Resistant Stainless Steel Clevis Fork Joints

JW WINCO Corrosion-Resistant Stainless Steel Clevis Fork Joint

JW WINCO Clevis Rod Ends: Stainless Steel adalah sambungan garpu (clevis fork joints) berbahan stainless steel yang dirancang untuk ketahanan korosi tinggi pada aplikasi industri. Produk ini memiliki tipe Plain…

SKU 3G-OTH-139326

Juga terdaftar sebagai: 751816M8ANI · 751 8 16 M8 A NI

Merek
JW WINCO
Item
Corrosion-Resistant Stainless Steel Clevis Fork Joint
Kategori
Corrosion-Resistant Stainless Steel Clevis Fork Joints
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
751-8-16-M8-A-NI
Type
Plain, M8 Tap Size, Right Hand
Body Wd
16 mm

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Clevis Rod Ends: Stainless Steel adalah sambungan garpu (clevis fork joints) berbahan stainless steel yang dirancang untuk ketahanan korosi tinggi pada aplikasi industri. Produk ini memiliki tipe Plain dengan ukuran tap M8 dan ulir Right Hand, lebar bodi 16 mm, serta nomor komponen 751-8-16-M8-A-NI. Cocok digunakan sebagai suku cadang pembakar atau komponen mekanis pada peralatan industri yang memerlukan sambungan kuat dan tahan karat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Clevis Rod Ends: Stainless Steel?

JW WINCO Clevis Rod Ends: Stainless Steel memiliki tipe Plain, ukuran tap M8, ulir Right Hand, lebar bodi 16 mm, dan nomor komponen 751-8-16-M8-A-NI. Produk ini terbuat dari stainless steel untuk ketahanan korosi.

Untuk apa JW WINCO Clevis Rod Ends: Stainless Steel digunakan?

Produk ini digunakan sebagai sambungan garpu (clevis fork joints) pada sistem mekanis, seperti pada rangkaian gas atau peralatan pembakaran industri, untuk menghubungkan batang atau aktuator dengan beban ringan hingga sedang.

Di mana beli JW WINCO Clevis Rod Ends: Stainless Steel di Indonesia?

Anda dapat membeli JW WINCO Clevis Rod Ends: Stainless Steel melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan bea cukai untuk memastikan pengiriman lancar.

Bagaimana cara memilih JW WINCO Clevis Rod Ends yang tepat?

Pilih berdasarkan ukuran tap (M8), arah ulir (Right Hand), dan lebar bodi (16 mm) yang sesuai dengan aplikasi Anda. Pastikan komponen ini cocok dengan sistem mekanis yang memerlukan sambungan stainless steel tahan korosi.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO corrosion-resistant stainless steel clevis fork joints. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This clevis fork head is made of corrosion-resistant stainless steel for mechanical linkage applications. It features a plain design with M4 tap size, right-hand thread, and 8 mm body width. Suitable for connecting rods or cables to pivoting components in industrial machinery and automation
JW WINCO
This clevis fork head is made of corrosion-resistant stainless steel for mechanical linkage applications. It features a plain design with M4 tap size, right-hand thread, and 8 mm body width. Suitable for connecting rods or cables to pivoting components in industrial machinery and automation
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
Steel clevis fork head with blue passivated zinc plated finish. M4 tap size, right-hand thread, 8 mm body width. Used to connect threaded rods or cables to clevis pins, allowing pivoting motion in mechanical linkages such as industrial machinery and actuators
JW WINCO
Steel clevis fork head with blue passivated zinc plated finish. M4 tap size, right-hand thread, 8 mm body width. Used to connect threaded rods or cables to clevis pins, allowing pivoting motion in mechanical linkages such as industrial machinery and actuators
This clevis fork joint features a black anodized aluminum body for wear resistance. It has an M4 tap size with right-hand threading and an 8 mm body width. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint features a black anodized aluminum body for wear resistance. It has an M4 tap size with right-hand threading and an 8 mm body width. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot/swivel design for multi-angle lifting. It has an M8 thread size, 12 mm working pin length, and a working load limit of 2.1 kN with a side load capacity of 0.8 kN (180 lbf). Suitable for lifting operations in environments where corrosion resistance is required
JW WINCO
This corrosion-resistant quick-release hoist ring is made of stainless steel and features a pivot/swivel design for multi-angle lifting. It has an M8 thread size, 12 mm working pin length, and a working load limit of 2.1 kN with a side load capacity of 0.8 kN (180 lbf). Suitable for lifting operations in environments where corrosion resistance is required
Corrosion-resistant pivot-only hoist ring with M16 threaded stud and 17 mm working pin length. Stainless steel construction. Rated for 8.4 kN lifting load and 4.2 kN (944 lbf) side load. Suitable for lifting applications requiring a quick-release attachment point in corrosive environments
JW WINCO
Corrosion-resistant pivot-only hoist ring with M16 threaded stud and 17 mm working pin length. Stainless steel construction. Rated for 8.4 kN lifting load and 4.2 kN (944 lbf) side load. Suitable for lifting applications requiring a quick-release attachment point in corrosive environments

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with M12 tap size and right-hand thread, and a body width of 24 mm. Used in mechanical linkages to connect a threaded rod or shaft, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with M12 tap size and right-hand thread, and a body width of 24 mm. Used in mechanical linkages to connect a threaded rod or shaft, allowing pivoting motion in industrial machinery and automation systems
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M6 tap size and right-hand thread orientation. The body width is 12 mm. Used in mechanical linkages to connect a threaded rod or shaft, allowing pivoting motion in industrial machinery, automation, and material handling systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M6 tap size and right-hand thread orientation. The body width is 12 mm. Used in mechanical linkages to connect a threaded rod or shaft, allowing pivoting motion in industrial machinery, automation, and material handling systems
This clevis fork joint is made from corrosion-resistant stainless steel with a plain design. It features an M8 tap size, right-hand thread orientation, and a 16 mm body width. Used in industrial linkage connections for machinery, actuators, and conveyor systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel with a plain design. It features an M8 tap size, right-hand thread orientation, and a 16 mm body width. Used in industrial linkage connections for machinery, actuators, and conveyor systems
This clevis fork joint is made from corrosion-resistant stainless steel for use in mechanical linkage systems. It features a plain type with M12 tap size and right-hand thread, and a 24 mm body width. Suitable for connecting rods or cables in applications requiring pivoting motion
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel for use in mechanical linkage systems. It features a plain type with M12 tap size and right-hand thread, and a 24 mm body width. Suitable for connecting rods or cables in applications requiring pivoting motion
This clevis fork joint is made of corrosion-resistant stainless steel, featuring a plain design with an M10 tap size and right-hand thread. The body width is 20 mm. It is used in mechanical linkages to connect a rod to a mating pin or bolt, providing a pivoting adjustable connection in industrial machinery and automation systems
JW WINCO
This clevis fork joint is made of corrosion-resistant stainless steel, featuring a plain design with an M10 tap size and right-hand thread. The body width is 20 mm. It is used in mechanical linkages to connect a rod to a mating pin or bolt, providing a pivoting adjustable connection in industrial machinery and automation systems
This clevis fork joint is made from corrosion-resistant stainless steel with a plain finish. It features an M5 tap size, right-hand thread, and a 10 mm body width. Used in mechanical linkages and actuation systems to connect a rod end to a clevis pin, enabling pivoting motion in industrial machinery and automation equipment
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel with a plain finish. It features an M5 tap size, right-hand thread, and a 10 mm body width. Used in mechanical linkages and actuation systems to connect a rod end to a clevis pin, enabling pivoting motion in industrial machinery and automation equipment