Kami mengirim ke Indonesia — pintu ke pintu, bea cukai dan logistik ditangani oleh 3G Electric

3G Electric
Keranjang Permintaan PenawaranMinta PenawaranMasukDaftar
JW WINCO 751-10-20-M10-A-NI Corrosion-Resistant Stainless Steel - Corrosion-Resistant Stainless Steel Clevis Fork Joints
JW WINCOCorrosion-Resistant Stainless Steel Clevis Fork Joints

JW WINCO 751-10-20-M10-A-NI Corrosion-Resistant Stainless Steel

JW WINCO Clevis Rod Ends: Stainless Steel adalah sambungan garpu (clevis fork joint) berbahan stainless steel yang dirancang untuk ketahanan korosi tinggi pada aplikasi industri. Produk ini memiliki tipe Plain dengan…

SKU 3G-OTH-139327

Juga terdaftar sebagai: 7511020M10ANI · 751 10 20 M10 A NI

Merek
JW WINCO
Item
751-10-20-M10-A-NI Corrosion-Resistant Stainless Steel
Kategori
Corrosion-Resistant Stainless Steel Clevis Fork Joints
Tersedia untuk Dipesan
Stok tersedia & bea cukai ditangani
  • 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
  • Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
  • Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Harga dagang sesuai penawaran — balasan dalam 24 jam
Jumlah
WhatsApp seorang insinyurMessage via Telegram
Tidak perlu akun — permintaan penawaran Anda langsung masuk ke tim insinyur kami. Akun gratis memungkinkan Anda melacak penawaran dan memesan ulang lebih cepat.
Pengiriman ke Seluruh Dunia
Pengiriman udara & laut
Lembar Data Atas Permintaan
Spesifikasi teknis
Penawaran 1 Hari
Balasan dalam 24 jam

Local availability & support — Indonesia

Phone
+65 8878 8355

Spesifikasi Teknis

JW WINCO
Manufacturer Part Number
751-10-20-M10-A-NI
Type
Plain, M10 Tap Size, Right Hand
Body Wd
20 mm

Dokumen Teknis

Tidak ada dokumen teknis yang tersedia untuk produk ini.
Minta dokumentasi →
Tidak yakin ini adalah suku cadang yang tepat? Minta rekomendasi.

Butuh bantuan pemasangan atau rekayasa?

Instalasi, komisioning, rencana pemeliharaan, desain sistem, dan penawaran produk + layanan bundel — satu tim menangani cakupan penuh.
Bicaralah dengan seorang insinyur

Ajukan pertanyaan

JW WINCO Produk
3G Electric (S) Pte. Ltd. — Singapore

Deskripsi Produk

JW WINCO Clevis Rod Ends: Stainless Steel adalah sambungan garpu (clevis fork joint) berbahan stainless steel yang dirancang untuk ketahanan korosi tinggi pada aplikasi industri. Produk ini memiliki tipe Plain dengan ukuran tap M10 dan arah ulir Right Hand, lebar bodi 20 mm, serta nomor komponen 751-10-20-M10-A-NI. Cocok digunakan sebagai komponen sambungan mekanis pada sistem aktuasi atau penggerak di lingkungan yang memerlukan ketahanan terhadap karat.

Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.

Pertanyaan yang Sering Diajukan

Apa spesifikasi JW WINCO Clevis Rod Ends: Stainless Steel?

JW WINCO Clevis Rod Ends: Stainless Steel memiliki tipe Plain, ukuran tap M10, arah ulir Right Hand, lebar bodi 20 mm, dan nomor komponen 751-10-20-M10-A-NI. Produk ini terbuat dari stainless steel untuk ketahanan korosi.

Untuk apa JW WINCO Clevis Rod Ends: Stainless Steel digunakan?

Produk ini digunakan sebagai sambungan garpu (clevis fork joint) pada sistem mekanis yang memerlukan sambungan putar atau artikulasi, seperti pada aktuator, silinder pneumatik, atau penggerak linier di lingkungan industri yang rentan terhadap korosi.

Bagaimana cara memilih JW WINCO Clevis Rod Ends: Stainless Steel yang tepat?

Pastikan Anda memilih tipe Plain dengan ukuran tap M10 dan arah ulir Right Hand sesuai kebutuhan aplikasi. Periksa lebar bodi 20 mm dan nomor komponen 751-10-20-M10-A-NI untuk memastikan kesesuaian dengan sistem sambungan Anda.

Di mana beli JW WINCO Clevis Rod Ends: Stainless Steel di Indonesia?

Anda dapat membeli JW WINCO Clevis Rod Ends: Stainless Steel melalui 3G Electric, distributor resmi yang memasok dan mengirimkan produk ini ke seluruh Indonesia. Kami menangani logistik dan kepabeanan untuk memastikan pengiriman sampai ke lokasi Anda.

Digunakan dalam

Aplikasi umum untuk JW WINCO
Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.
Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.
Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.
Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.
Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.
Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Produk

3G Electric memasok JW WINCO corrosion-resistant stainless steel clevis fork joints. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.

Anda mungkin juga membutuhkan

Pembakar & Pembakaran →Pompa & Kompresor →Suku Cadang →Semua Produk →

Compatible alternatives & equivalents

Cross-referenced by specification & description
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
JW WINCO
This clevis fork head is made from corrosion-resistant stainless steel. It features a plain design with a right-hand M12 tap size and a 24 mm body width. Used in industrial linkages to connect a rod to a clevis pin, allowing pivoting motion in applications where corrosion resistance is required
This clevis fork head is made of corrosion-resistant stainless steel for mechanical linkage applications. It features a plain design with M4 tap size, right-hand thread, and 8 mm body width. Suitable for connecting rods or cables to pivoting components in industrial machinery and automation
JW WINCO
This clevis fork head is made of corrosion-resistant stainless steel for mechanical linkage applications. It features a plain design with M4 tap size, right-hand thread, and 8 mm body width. Suitable for connecting rods or cables to pivoting components in industrial machinery and automation
Steel clevis fork head with blue passivated zinc plated finish. M4 tap size, right-hand thread, 8 mm body width. Used to connect threaded rods or cables to clevis pins, allowing pivoting motion in mechanical linkages such as industrial machinery and actuators
JW WINCO
Steel clevis fork head with blue passivated zinc plated finish. M4 tap size, right-hand thread, 8 mm body width. Used to connect threaded rods or cables to clevis pins, allowing pivoting motion in mechanical linkages such as industrial machinery and actuators
This clevis fork joint features a black anodized aluminum body for wear resistance. It has an M4 tap size with right-hand threading and an 8 mm body width. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint features a black anodized aluminum body for wear resistance. It has an M4 tap size with right-hand threading and an 8 mm body width. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
This stainless steel hoist ring features a quick-release pivot and swivel design for lifting and positioning loads. With an M12 thread size and 17 mm working pin length, it has a working load limit of 6.2 kN and a side load limit of 2.3 kN (517 lbf). Suitable for industrial lifting applications requiring corrosion resistance
JW WINCO
This stainless steel hoist ring features a quick-release pivot and swivel design for lifting and positioning loads. With an M12 thread size and 17 mm working pin length, it has a working load limit of 6.2 kN and a side load limit of 2.3 kN (517 lbf). Suitable for industrial lifting applications requiring corrosion resistance
Corrosion-resistant pivot-only hoist ring with M16 threaded stud and 17 mm working pin length. Stainless steel construction. Rated for 8.4 kN lifting load and 4.2 kN (944 lbf) side load. Suitable for lifting applications requiring a quick-release attachment point in corrosive environments
JW WINCO
Corrosion-resistant pivot-only hoist ring with M16 threaded stud and 17 mm working pin length. Stainless steel construction. Rated for 8.4 kN lifting load and 4.2 kN (944 lbf) side load. Suitable for lifting applications requiring a quick-release attachment point in corrosive environments

Lainnya dari JW WINCO

Lihat semua JW WINCO suku cadang →
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with M12 tap size and right-hand thread, and a body width of 24 mm. Used in mechanical linkages to connect a threaded rod or shaft, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with M12 tap size and right-hand thread, and a body width of 24 mm. Used in mechanical linkages to connect a threaded rod or shaft, allowing pivoting motion in industrial machinery and automation systems
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M16 tap size and right-hand thread, and a body width of 32 mm. Used in mechanical linkages to connect threaded rods or shafts, allowing pivoting motion in industrial machinery and automation systems
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel, featuring a plain design with an M6 tap size and right-hand thread. The body width is 12 mm. It is used to connect a rod to a clevis pin, allowing angular misalignment in mechanical linkages
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M6 tap size and right-hand thread orientation. The body width is 12 mm. Used in mechanical linkages to connect a threaded rod or shaft, allowing pivoting motion in industrial machinery, automation, and material handling systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel. It features a plain design with an M6 tap size and right-hand thread orientation. The body width is 12 mm. Used in mechanical linkages to connect a threaded rod or shaft, allowing pivoting motion in industrial machinery, automation, and material handling systems
This clevis fork joint is made from corrosion-resistant stainless steel with a plain design. It features an M8 tap size, right-hand thread orientation, and a 16 mm body width. Used in industrial linkage connections for machinery, actuators, and conveyor systems
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel with a plain design. It features an M8 tap size, right-hand thread orientation, and a 16 mm body width. Used in industrial linkage connections for machinery, actuators, and conveyor systems
This clevis fork joint is made from corrosion-resistant stainless steel for use in mechanical linkage systems. It features a plain type with M12 tap size and right-hand thread, and a 24 mm body width. Suitable for connecting rods or cables in applications requiring pivoting motion
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel for use in mechanical linkage systems. It features a plain type with M12 tap size and right-hand thread, and a 24 mm body width. Suitable for connecting rods or cables in applications requiring pivoting motion
This clevis fork joint is made from corrosion-resistant stainless steel for use in mechanical linkages where a rod connects to a clevis pin. It features a plain design with M8 tap size, right-hand thread, and 16 mm body width. Suitable for applications requiring resistance to rust in industrial, agricultural, or marine environments
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel for use in mechanical linkages where a rod connects to a clevis pin. It features a plain design with M8 tap size, right-hand thread, and 16 mm body width. Suitable for applications requiring resistance to rust in industrial, agricultural, or marine environments
This clevis fork joint is made from corrosion-resistant stainless steel with a plain finish. It features an M5 tap size, right-hand thread, and a 10 mm body width. Used in mechanical linkages and actuation systems to connect a rod end to a clevis pin, enabling pivoting motion in industrial machinery and automation equipment
JW WINCO
This clevis fork joint is made from corrosion-resistant stainless steel with a plain finish. It features an M5 tap size, right-hand thread, and a 10 mm body width. Used in mechanical linkages and actuation systems to connect a rod end to a clevis pin, enabling pivoting motion in industrial machinery and automation equipment