TIMKEN 4 Bolt Flange Bearing: Radial Ball, 1 11/16 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 11/16 in cylindrical bore and a cast iron housing. It features set screws for shaft locking and uses NLGI #2 equivalent…
SKU 3G-OTH-105593
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 11/16 in cylindrical bore and a cast iron housing. It features set screws for shaft locking and uses NLGI #2 equivalent lubricant. The bearing has a 7/16 in mounting bolt size and is designed for inch-system applications (MPN SCJ 1-11/16).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used in industrial equipment such as conveyors, fans, and material handling systems. It supports radial loads and accommodates shaft misalignment in inch-system applications. The cast iron housing and set screw locking provide secure mounting in moderate-duty environments.
What are the specifications of the TIMKEN SCJ 1-11/16 flange bearing?
The TIMKEN SCJ 1-11/16 flange bearing has a 1 11/16 in cylindrical bore, a cast iron housing with set screws, and a 5 23/64 in length. It uses NLGI #2 equivalent lubricant and requires a 7/16 in mounting bolt. The system of measurement is inch, and the manufacturer part number is SCJ 1-11/16.
Where to buy TIMKEN flange bearings worldwide?
You can source TIMKEN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the TIMKEN SCJ 1-11/16 or other models. We supply genuine TIMKEN components for industrial applications.
How to install a TIMKEN 4 bolt flange bearing?
To install a TIMKEN 4 bolt flange bearing, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the flange bolt holes, and tighten the 7/16 in mounting bolts evenly. Secure the shaft by tightening the set screws against the shaft. Apply NLGI #2 grease if needed. Always follow manufacturer guidelines for torque and alignment.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
