TIMKEN 4 Bolt Flange Bearing: Radial Ball, 1 7/16 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 7/16 in cylindrical bore, cast iron housing, and set screw locking. It features an NLGI #2 equivalent lubricant and a 7/16 in…
SKU 3G-OTH-105751
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 7/16 in cylindrical bore, cast iron housing, and set screw locking. It features an NLGI #2 equivalent lubricant and a 7/16 in mounting bolt size, with the manufacturer part number SCJ 1-7/16.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is used in industrial power transmission systems to support rotating shafts and handle radial loads. It is commonly applied in conveyors, fans, and material handling equipment where a compact, bolt-on mounting solution is needed.
What are the specifications of the TIMKEN SCJ 1-7/16 flange bearing?
The TIMKEN SCJ 1-7/16 is a 4 bolt flange bearing with a 1 7/16 in cylindrical bore, cast iron housing, and set screw locking. It uses NLGI #2 equivalent lubricant, has a 7/16 in mounting bolt size, and measures 4 5/8 in length. It is an inch-system general purpose bearing.
Where to buy TIMKEN flange bearings worldwide?
You can source TIMKEN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the SCJ 1-7/16 or other TIMKEN bearing models.
How to install a TIMKEN 4 bolt flange bearing?
To install a TIMKEN 4 bolt flange bearing, first ensure the shaft is clean and the bore is aligned. Slide the bearing onto the shaft, tighten the set screws evenly to lock it in place, then bolt the flange to a flat mounting surface using 7/16 in bolts. Apply moderate torque per manufacturer guidelines.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
