TIMKEN 4 Bolt Flange Bearing: Radial Ball, 2 3/16 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a cylindrical bore and a 2 3/16 in bore size. It features a cast iron housing, set screw locking, and a 6 23/64 in length…
SKU 3G-OTH-109042
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a cylindrical bore and a 2 3/16 in bore size. It features a cast iron housing, set screw locking, and a 6 23/64 in length, lubricated with NLGI #2 Equivalent grease. The mounting bolt size is 5/8 in, and the system of measurement is inch.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is used in industrial power transmission systems to support rotating shafts and handle radial loads. It is commonly applied in conveyors, fans, and material handling equipment where a compact, rigid mounting is needed.
What are the specifications of the TIMKEN 4 Bolt Flange Bearing?
This bearing has a 2 3/16 in cylindrical bore, a cast iron housing with set screw locking, and a 6 23/64 in length. It uses NLGI #2 Equivalent grease, requires a 5/8 in mounting bolt, and is inch-system. The manufacturer part number is SCJ 2-3/16.
Where to buy the TIMKEN 4 Bolt Flange Bearing worldwide?
You can source the TIMKEN 4 Bolt Flange Bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the bearing reaches your facility reliably.
How to install the TIMKEN 4 Bolt Flange Bearing?
Align the bearing's four mounting holes with the support structure, insert 5/8 in bolts, and tighten evenly. Secure the shaft using the set screws in the inner ring. Apply moderate torque per manufacturer guidelines and ensure the shaft is clean and lubricated before installation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
