TIMKEN 4 Bolt Flange Bearing: Radial Ball, 3/4 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 3/4 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, a square flange with a 3 23/64 in…
SKU 3G-OTH-112193
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 3/4 in cylindrical bore and a cast iron housing. It features set screws for shaft mounting, a square flange with a 3 23/64 in length, and uses NLGI #2 equivalent lubricant. The bearing requires a 3/8 in mounting bolt and is measured in inches, with manufacturer part number SCJ 3/4.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is used to support rotating shafts in industrial machinery, conveyors, and material handling equipment. Its square flange design allows secure mounting to flat surfaces, while the set screws lock the shaft in place. It handles radial loads in general purpose applications.
What are the specifications of the TIMKEN SCJ 3/4 flange bearing?
The TIMKEN SCJ 3/4 is a 4 bolt flange bearing with a 3/4 in cylindrical bore, cast iron housing, and set screw shaft locking. It uses NLGI #2 equivalent lubricant, requires a 3/8 in mounting bolt, and has a square flange length of 3 23/64 in. System of measurement is inch.
Where to buy TIMKEN flange bearings worldwide?
You can source TIMKEN flange bearings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the SCJ 3/4 or other TIMKEN bearing models.
How to install a TIMKEN 4 bolt flange bearing?
To install a TIMKEN 4 bolt flange bearing, first clean the shaft and housing surface. Slide the bearing onto the shaft, align the flange bolt holes, and tighten the 3/8 in mounting bolts evenly. Then tighten the set screws against the shaft to secure it. Apply NLGI #2 grease if needed per maintenance schedule.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
