TIMKEN 4 Bolt Flange Bearing: Radial Ball, 5/8 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 5/8 in cylindrical bore, cast iron housing, and set screw locking. It features a 3 in length, 1 in width, and uses NLGI #2…
SKU 3G-OTH-119595
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 5/8 in cylindrical bore, cast iron housing, and set screw locking. It features a 3 in length, 1 in width, and uses NLGI #2 Equivalent lubricant. The mounting bolt size is 3/8 in, and the system of measurement is inch (MPN SCJ 5/8).
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used to support rotating shafts in industrial machinery. It is commonly applied in conveyors, fans, and material handling equipment where a compact, rigid mounting is needed. The cast iron housing and set screw locking provide reliable shaft retention.
What are the specifications of the TIMKEN SCJ 5/8 flange bearing?
The TIMKEN SCJ 5/8 is a 4 bolt flange bearing with a 5/8 in cylindrical bore, cast iron housing, and set screw locking. It has a 3 in length, 1 in width, and uses NLGI #2 Equivalent lubricant. The mounting bolt size is 3/8 in, and the system of measurement is inch.
Where to buy TIMKEN SCJ 5/8 flange bearings worldwide?
You can source the TIMKEN SCJ 5/8 flange bearing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this part number.
How to install a TIMKEN 4 bolt flange bearing?
To install a TIMKEN 4 bolt flange bearing, first ensure the shaft is clean and free of burrs. Slide the bearing onto the shaft, align the flange bolt holes with the mounting surface, and tighten the 3/8 in bolts evenly. Then tighten the set screws against the shaft using the recommended torque. Lubrication is pre-applied with NLGI #2 grease.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
