TIMKEN 4 Bolt Flange Bearing: Radial Ball, 1 3/16 in Bore, Cast Iron, Set Screws
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 3/16 in cylindrical bore, cast iron housing, and set screw locking. It features a mounting bolt size of 3/8 in, uses NLGI #2…
SKU 3G-OTH-111448
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing with a 1 3/16 in cylindrical bore, cast iron housing, and set screw locking. It features a mounting bolt size of 3/8 in, uses NLGI #2 Equivalent lubricant, and is supplied in inch measurements under manufacturer part number SCJ 1-3/16.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN 4 Bolt Flange Bearing used for?
The TIMKEN 4 Bolt Flange Bearing is a general purpose flange-mount ball bearing used to support rotating shafts in industrial machinery. It is suitable for applications requiring radial load support, such as conveyors, fans, and material handling equipment, where a compact, bolt-on mounting solution is needed.
What are the specifications of the TIMKEN SCJ 1-3/16 flange bearing?
The TIMKEN SCJ 1-3/16 is a 4 bolt flange bearing with a 1 3/16 in cylindrical bore, cast iron housing, and set screw locking. It has a mounting bolt size of 3/8 in, uses NLGI #2 Equivalent lubricant, and measures 4 15/64 in length. It is an inch-system part (MPN SCJ 1-3/16).
Where to buy TIMKEN SCJ 1-3/16 flange bearing worldwide?
3G Electric supplies the TIMKEN SCJ 1-3/16 flange bearing worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to source this genuine TIMKEN part for your application.
How to install a TIMKEN 4 bolt flange bearing with set screws?
To install a TIMKEN 4 bolt flange bearing, first ensure the shaft is clean and the bore is aligned. Slide the bearing onto the shaft, then tighten the set screws evenly to lock the bearing in place. Mount the flange to a flat surface using 3/8 in bolts, torquing to manufacturer specifications. Lubricate per NLGI #2 guidelines.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose flange-mount ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
