TIMKEN Pillow Block Bearing: 1 3/8 in Bore, Cast Iron, Set Screws, 1 7/8 in Shaft Ht
The TIMKEN YAS 1-3/8 SGT is a general purpose pillow block ball bearing with a 1 3/8 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a 1 7/8 in shaft height, a 1/2 in…
SKU 3G-OTH-106167
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN YAS 1-3/8 SGT is a general purpose pillow block ball bearing with a 1 3/8 in bore, constructed from cast iron and featuring set screw locking. This inch-system unit has a 1 7/8 in shaft height, a 1/2 in mounting bolt size, and a maximum operating temperature of 200°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YAS 1-3/8 SGT pillow block bearing used for?
The TIMKEN YAS 1-3/8 SGT is a general purpose pillow block ball bearing used to support rotating shafts in industrial machinery such as conveyors, fans, and pumps. Its cast iron housing and set screw locking provide reliable shaft retention in moderate-load, low-to-medium-speed applications up to 200°F.
What are the specifications of the TIMKEN YAS 1-3/8 SGT pillow block bearing?
The TIMKEN YAS 1-3/8 SGT has a 1 3/8 in bore, cast iron housing, set screw locking, 1 7/8 in shaft height, 1/2 in mounting bolt size, and a maximum operating temperature of 200°F. It uses inch-system measurements and is designed for general purpose use.
Where to buy the TIMKEN YAS 1-3/8 SGT pillow block bearing worldwide?
3G Electric supplies the TIMKEN YAS 1-3/8 SGT pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install a TIMKEN pillow block bearing with set screw locking?
To install a TIMKEN pillow block bearing with set screws, first clean the shaft and housing bore. Slide the bearing onto the shaft, align the housing base with the mounting surface, and tighten the mounting bolts. Then alternately tighten the set screws to the manufacturer's recommended torque to secure the shaft.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
