TIMKEN Pillow Block Bearing: 1 in Bore, Cast Iron, Set Screws, 1 27/64 in Shaft Ht
The TIMKEN YAS 1 SGT is a general purpose pillow block ball bearing with a 1-inch bore, designed for inch-system applications. This cast-iron unit features set-screw locking and a 1 27/64-inch shaft height, with a…
SKU 3G-OTH-108813
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN YAS 1 SGT is a general purpose pillow block ball bearing with a 1-inch bore, designed for inch-system applications. This cast-iron unit features set-screw locking and a 1 27/64-inch shaft height, with a maximum operating temperature of 200°F. It is mounted using 3/8-inch bolts.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN YAS 1 SGT pillow block bearing used for?
The TIMKEN YAS 1 SGT is a general purpose pillow block ball bearing used to support rotating shafts in industrial equipment such as conveyors, fans, and pumps. Its cast-iron housing and set-screw locking provide reliable shaft retention in moderate-load, inch-system applications up to 200°F.
What are the specifications of the TIMKEN YAS 1 SGT?
The TIMKEN YAS 1 SGT has a 1-inch bore, cast-iron housing, set-screw locking, and a shaft height of 1 27/64 inches. It uses 3/8-inch mounting bolts, operates up to 200°F, and is designed for inch-system measurements. The manufacturer part number is YAS 1 SGT.
Where to buy the TIMKEN YAS 1 SGT worldwide?
3G Electric supplies the TIMKEN YAS 1 SGT pillow block bearing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install the TIMKEN YAS 1 SGT pillow block bearing?
To install the TIMKEN YAS 1 SGT, first align the housing with the mounting surface and secure it using 3/8-inch bolts. Insert the shaft through the bore and tighten the set screws evenly against the shaft. Ensure the shaft rotates freely and the temperature stays below 200°F during operation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
