TIMKEN Pillow Block Bearing: 2 1/8 in Bore, Cast Iron, Eccentric Collar, 2 27/64 in Shaft Ht
The TIMKEN Pillow Block Bearing (SKU 842W13, MPN RAK 2-1/8) is a general purpose pillow block ball bearing with a 2 1/8 in bore. It features a cast iron housing, eccentric collar, 2 27/64 in shaft height, and shroud…
SKU 3G-OTH-115190
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The TIMKEN Pillow Block Bearing (SKU 842W13, MPN RAK 2-1/8) is a general purpose pillow block ball bearing with a 2 1/8 in bore. It features a cast iron housing, eccentric collar, 2 27/64 in shaft height, and shroud seal. This inch-system bearing has a maximum speed of 3200 RPM with grease lubrication and requires a 5/8 in mounting bolt.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is the TIMKEN RAK 2-1/8 pillow block bearing used for?
The TIMKEN RAK 2-1/8 pillow block bearing supports rotating shafts in industrial equipment such as conveyors, fans, and pumps. Its cast iron housing and eccentric collar provide secure shaft mounting, while the shroud seal protects against contaminants in general-purpose applications.
What are the specifications of the TIMKEN RAK 2-1/8 pillow block bearing?
The TIMKEN RAK 2-1/8 pillow block bearing has a 2 1/8 in bore, cast iron housing, eccentric collar, and 2 27/64 in shaft height. It operates at a maximum speed of 3200 RPM with grease lubrication, uses a 5/8 in mounting bolt, and follows the inch system of measurement.
Where to buy the TIMKEN RAK 2-1/8 pillow block bearing worldwide?
3G Electric supplies the TIMKEN RAK 2-1/8 pillow block bearing worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this inch-system bearing with a 2 1/8 in bore.
How to install the TIMKEN RAK 2-1/8 pillow block bearing?
To install the TIMKEN RAK 2-1/8 pillow block bearing, first align the shaft with the bore and tighten the eccentric collar to lock the bearing. Secure the housing to a flat surface using 5/8 in bolts. Apply grease lubrication and verify the shaft rotates freely before operation.
Digunakan dalam
Aplikasi umum untuk TIMKENTIMKEN Produk
3G Electric memasok TIMKEN general purpose pillow block ball bearings. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
