Topog-E Series 180 Gaskets – molded rubber gaskets

[{"filename":"Topog-E-3G-OTH-02629-DataSheet-Rev1-1.pdf","text":"Topog-E® Series 180 Gaskets\n\n MATERIAL COMPOSITION AND APPLICATION MATERIAL DESCRIPTION\nThe steam boiler market makes extreme demands on gaskets; Topog-E® molded rubber Special proprietary\n rubber composition, black,\ngaskets are specifically formulated to meet and exceed these demands and deliver\n 80-85 durometer\nindustry standard performance.\n SIZES\nTopog-E® Series 180 gaskets have been refined through a series of over 600 research\n Topog-E® Series 180 gaskets are\nformulation tests to ensure that they are able to meet the exacting performance standards\n available in 350 stock sizes and\nof the steam boiler industry. shapes.\n Custom shapes, sizes and sheet\n material are available on request.\nTopog-E® Series 180 gasket advantages:\nConform to the topography of the mating surfaces ORDERING\nWithstand a boiler’s full, continuous and cycling operating pressures\n Please either contact your local\nWithstand continuous exposure to water treatment chemicals distributor for Topog-E® Series 180\n gaskets or contact Topog-E® directly\nWithstand continuous exposure to ion and oxygen attack in hot air for details of your nearest distributor.\nPrevent all leakage\n SERVICE SUMMARY\nReplace easily, without chiseling or buffing\n Steam boilers\n Temperature: up to380°F (193°C)\n Pressure: 180 psig (12 bar)\n\n Water, condensate, etc. vessels\n Temperature: less than 300°F (150°C)\n Pressure: 200+ psig (14 bar)\n\n\n\n\n Topog-E, LLC · 1150 Guadalupe Drive · Cibolo, Texas 78108\n 918-587-6649 · info@topog-e.com · www.topog-e.com\n All information in this data sheet is based on data believed to be reliable; however, we make no guarantee or warranty of the perfor-\n mance of Topog-E® Series 180 gaskets. Due to numerous application-specific factors that can influence service life, it is always advis-\n able to first test Topog-E® Series 180 gaskets in a particular application to determine their ultimate suitability.\n\fTopog-E® Series 180 Gaskets\n\n APPLICATIONS ■ Water softeners\n ■ Hot water heaters\nWhen used on steam pressure vessels Topog-E® Series 180 gaskets are typically used at ■ Steam humidifiers and cookers\noperating pressures of up to 180 PSI (12 bar) and saturated steam temperatures up to ■ Water purifiers and demineralizers\n380º F. (193º C) for an average service life of one year. When used in other applications ■ Refrigeration units\n(e.g. condensate, water, and air vessels) Topog-E® Series 180 gaskets are sometimes ■ Liquid treatment vessels\nused at pressures above 200 PSI (14 bar) where temperatures are typically more ■ Carbon absorption and\nmoderate (e.g. below 250ºF./121ºC.). When operating under less severe conditions (e.g. filtering vessels\nwater applications at ambient temperatures) Topog-E® Series 180 gaskets can provide ■ Dryer cans in paper mills\nvery long service lives. ■ Water hydrants\n ■ Mixing tanks\nTopog-E® Series 180 gaskets have been used successfully around the world for over ■ Compressed air tanks\nforty years. In general, any type of industrial pressure vessel or tank that has inspection ■ Various types of dryers\n ■ Air starters and receivers\nopenings is a potential application where Topog-E® Series 180 gaskets can be used as\n ■ Deaerators\na cost effective sealing device. In addition to using them in steam pressure vessels,\n ■ Hatch covers\ncustomers also use Topog-E® molded gaskets and sheet material with great success in\n ■ Water towers and columns\nmany other applications, including:\n ■ PVC reactor vessels\n\n\n INSTALLATION ENVIRONMENT & SUITABILITY\nTopog-E® Series 180 gaskets are specifically formulated to have excellent resistance to\nsteam and hot and cold water. They also have great resistance to:\n ■ Alcohols ■ Selected refrigerants\n ■ Ketones ■ Ammonia\n ■ Phosphate esters ■ Salts\n ■ Silicone oils and greases ■ Glycols\n ■ Dilute acids and bases ■ Animal and Vegetable fats\n\nWater treatment chemicals, when used in accordance with supplier’s guidelines, should\nnot have a significant effect on the service life of properly installed Topog-E® Series 180\ngaskets. Topog-E® Series 180 gaskets are not recommended for use in applications where\nthey see direct exposure to high concentrations of aromatic hydrocarbons, chlorinated\nsolvents, or petroleum based oils, fuels, and lubricants.\n\n\n\n\n Topog-E, LLC · 1150 Guadalupe Drive · Cibolo, Texas 78108\n 918-587-6649 · info@topog-e.com · www.topog-e.com\n All information in this data sheet is based on data believed to be reliable; however, we make no guarantee or warranty of the perfor-\n mance of Topog-E® Series 180 gaskets. Due to numerous application-specific factors that can influence service life, it is always advis-\n able to first test Topog-E® Series 180 gaskets in a particular application to determine their ultimate suitability."}]