Topog-E Series TPG Tadpole Gaskets – Fiberglass and Ceramic, rated to 2300°F.

[{"filename":"Topog-E-TPG-DataSheet.pdf","text":"Topog-E® Tadpole Seals\n\n MATERIAL COMPOSITION AND APPLICATION KEY FEATURES\nTopog-E® Tadpole P-Style seals are suitable for a wide range of dry heat applications. They are typically · Excellent insulation properties\nused in door sealing applications where extreme operating temperatures normally apply. The type of · Bulbs of different\nseal required will often depend on several operational factors, notably the operating temperature of compressibility depending\nthe equipment, and the frequency that the door is opened and closed. on selection\n · Fiberglass and ceramic with\nTadpole Seal - Outer Cover Options\n resistances to oils, solvents,\n MATERIAL TEMPERATURE KEY FEATURES and chemicals\n Woven from heat treated E type glass yarns with\n Up to 1000°F\n Fiberglass E-type exceptional thermal resistance. Good resistance to\n (+537°C)\n oils, solvents, thermal shock, and chemicals\n Woven ceramic yarns with even better thermal\n Up to 2300°F\n Ceramic resistance. Good resistance to steam, olis, solvents,\n (+1260°C)\n and chemicals.\n\nTadpole Seal - Bulb Options\n MATERIAL TEMPERATURE KEY FEATURES\n\n Up to 1000°F Soft, very compressible bulb. Typically used on doors\n Fiberglass Rope\n (+537°C) opened very infrequently.\n\n Up to 2300°F Soft, very compressible bulb. Typically used on doors\n Ceramic Rope\n (+1260°C) opened very infrequently.\n P-Style\n Up to 900°F Springs back into shape following compression.\n 304SS Wire Mesh\n (+482°C) Typically used on doors opened extremely frequently.\n\n Up to 2000°F Springs back into shape following compression.\n Inconel 600 Wire Mesh\n (+1093°C) Typically used on doors opened extremely frequently.\n\n\nTadpole Seal - Typical Size Ranges\n BULB DIAMETER TAIL LENGTH TAIL THICKNESS\n 1/4\" to 2-1/2\" 1/2\" to 4\" 1/16\" to 1/4\"\n\n\n\n\n Topog-E, LLC · 1150 Guadalupe Drive · Cibolo, Texas 78108\n 918-587-6649 · info@topog-e.com · www.topog-e.com\n All information in this data sheet is based on data believed to be reliable; however, we make no guarantee or warranty of the perfor-\n mance of Topog-E® Tadpole seals. Due to numerous application-specific factors that can influence service life, it is always advisable to\n first test Topog-E® Tadpole seals in a particular application to determine their ultimate suitability."}]