USA INDUSTRIALS Pipe Nipple: 1 in Nominal Pipe Size, 10 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22327) is a Schedule 40, galvanized steel nipple with a 1 in nominal pipe size, 10 in length, and Male NPT x Male NPT threads on both ends. It features a PTFE thread…
SKU 3G-OTH-464453
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (MPN ZUSA-PF-22327) is a Schedule 40, galvanized steel nipple with a 1 in nominal pipe size, 10 in length, and Male NPT x Male NPT threads on both ends. It features a PTFE thread sealant and has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 pipe nipple used for?
This galvanized steel pipe nipple connects two male NPT fittings in plumbing, compressed air, and industrial piping systems. Its 1 in nominal size and 10 in length suit tight spaces where a short, threaded connector is needed.
What are the specifications of the USA INDUSTRIALS pipe nipple ZUSA-PF-22327?
The USA INDUSTRIALS pipe nipple has a 1 in nominal pipe size, 10 in length, Schedule 40 wall thickness, galvanized steel construction, and Male NPT x Male NPT threads on both ends. It includes PTFE thread sealant and is rated for 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipple ZUSA-PF-22327 worldwide?
3G Electric supplies and delivers the USA INDUSTRIALS pipe nipple ZUSA-PF-22327 to worldwide locations. We handle full logistics and customs clearance, ensuring you receive the correct Schedule 40 galvanized nipple with PTFE sealant for your industrial application.
How to install a threaded pipe nipple with PTFE sealant?
Apply additional PTFE tape or pipe dope to the male threads for a leak-free seal. Hand-tighten the nipple into the female fitting, then use a wrench for an additional 1-2 turns. Avoid overtightening to prevent thread damage. Test at 125 psi max.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
