USA INDUSTRIALS Pipe Nipple: 3/4 in Nominal Pipe Size, 5 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel pipe nipple with a 3/4 in nominal pipe size and 5 in length, threaded on both ends with Male NPT x Male NPT connections and PTFE thread sealant. It…
SKU 3G-OTH-464470
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel pipe nipple with a 3/4 in nominal pipe size and 5 in length, threaded on both ends with Male NPT x Male NPT connections and PTFE thread sealant. It has a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 3/4 in pipe nipple connects two male NPT threaded fittings in plumbing, compressed air, and low-pressure fluid systems. Its galvanized steel resists corrosion in industrial environments. 3G Electric supplies this USA INDUSTRIALS component across 14 industrial departments, including pneumatics and material handling.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22461 pipe nipple?
This pipe nipple has a 3/4 in nominal size, 5 in length, Schedule 40 wall, galvanized steel construction, and Male NPT x Male NPT threads. Maximum operating pressure is 125 psi @ 72°F. It includes PTFE thread sealant. 3G Electric sources this USA INDUSTRIALS part for global delivery.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine parts like this Schedule 40 galvanized nipple and support your procurement from inquiry to arrival.
How to install a threaded galvanized pipe nipple?
Apply PTFE tape or sealant to the male NPT threads, then hand-tighten the nipple into the female fitting. Use a wrench for final snugging—avoid overtightening to prevent thread damage. For this USA INDUSTRIALS nipple, ensure operating pressure stays below 125 psi @ 72°F. 3G Electric can advise on selection.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
