USA INDUSTRIALS Pipe Nipple: 1/2 in Nominal Pipe Size, 36 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 36 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on…
SKU 3G-OTH-464480
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/2 in nominal pipe size and 36 in length. It features male NPT x male NPT connections with PTFE thread sealant applied on both ends, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized pipe nipple used for?
This 1/2 in NPT pipe nipple connects male-threaded fittings in plumbing, compressed air, and low-pressure fluid systems. Its galvanized steel resists corrosion in indoor and outdoor industrial applications up to 125 psi at 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22343 pipe nipple?
This pipe nipple has a 1/2 in nominal size, 36 in length, Schedule 40 wall, galvanized steel construction, and male NPT threads on both ends. PTFE thread sealant is pre-applied. Maximum operating pressure is 125 psi at 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this Schedule 40 galvanized nipple with PTFE sealant.
How to install a galvanized steel pipe nipple with PTFE sealant?
Ensure threads are clean, then hand-tighten the nipple into the female fitting. Use a wrench on the nipple's hex section for final tightening—avoid over-torquing galvanized threads. The pre-applied PTFE sealant provides leak protection up to 125 psi.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
