USA INDUSTRIALS Pipe Nipple: 1/4 in Nominal Pipe Size, 72 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 72 in length. It features male NPT threads on both ends with PTFE thread sealant, rated for a…
SKU 3G-OTH-464507
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple is a Schedule 40, galvanized steel, welded pipe nipple with a 1/4 in nominal pipe size and 72 in length. It features male NPT threads on both ends with PTFE thread sealant, rated for a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS Schedule 40 galvanized steel pipe nipple used for?
This 1/4 in nominal pipe size, 72 in long nipple connects male NPT threaded components in low-pressure galvanized steel piping systems. It is suitable for air, water, and gas lines up to 125 psi @ 72°F, common in industrial plumbing and compressed air networks.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22371 pipe nipple?
This Schedule 40 galvanized steel welded nipple has a 1/4 in nominal size, 72 in length, male NPT threads on both ends, and PTFE thread sealant. Maximum operating pressure is 125 psi @ 72°F. The manufacturer part number is ZUSA-PF-22371.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies and delivers USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance to ensure your order reaches any international destination. Contact us for availability and lead time.
How to install a threaded galvanized steel pipe nipple?
Apply pipe joint compound or PTFE tape to the male NPT threads, then hand-tighten the nipple into the female fitting. Use wrenches on the nipple's hex ends for final tightening—avoid overtightening to prevent thread damage. Always depressurize the system before installation.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
