USA INDUSTRIALS Pipe Nipple: 1 1/4 in Nominal Pipe Size, 3 in Lg, Schedule 40, Galvanized Steel
The USA INDUSTRIALS Pipe Nipple (SKU 407FH8) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 3 in length. It features Male NPT x Male NPT connections, pre-applied PTFE…
SKU 3G-OTH-464449
- 6–10 business days door-to-door; Bea Cukai clearance typically 3–5 business days.
- Invoicing in IDR or USD. Bank transfer and corporate PO accepted.
- Dikirim ke: Jakarta, Surabaya, Bandung, Medan, Batam
Butuh bantuan pemasangan atau rekayasa?
Ajukan pertanyaan
Deskripsi Produk
The USA INDUSTRIALS Pipe Nipple (SKU 407FH8) is a Schedule 40, galvanized steel, welded pipe nipple with a 1 1/4 in nominal pipe size and 3 in length. It features Male NPT x Male NPT connections, pre-applied PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Supplied to Indonesia — compatible with 50 Hz installations. DHL Express delivery to Jakarta, Surabaya, Bandung, customs and duties handled door-to-door.
Pertanyaan yang Sering Diajukan
What is a USA INDUSTRIALS pipe nipple used for?
A USA INDUSTRIALS pipe nipple connects two male NPT fittings in plumbing, pneumatic, or low-pressure fluid systems. This Schedule 40 galvanized steel nipple with pre-applied PTFE sealant is suitable for water, air, and gas lines up to 125 psi @ 72°F.
What are the specifications of the USA INDUSTRIALS ZUSA-PF-22401 pipe nipple?
The USA INDUSTRIALS ZUSA-PF-22401 is a 1 1/4 in nominal pipe size, 3 in long, Schedule 40, galvanized steel, welded pipe nipple. It has Male NPT x Male NPT connections, pre-applied PTFE thread sealant, and a maximum operating pressure of 125 psi @ 72°F.
Where to buy USA INDUSTRIALS pipe nipples worldwide?
3G Electric supplies USA INDUSTRIALS pipe nipples worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order the ZUSA-PF-22401 or other sizes for your project.
How to install a galvanized steel pipe nipple with PTFE sealant?
Ensure threads are clean, then hand-tighten the nipple into the female fitting. Use a wrench for final tightening—avoid overtightening to prevent cracking. The pre-applied PTFE sealant eliminates need for additional tape or compound. Test system pressure after installation.
Digunakan dalam
Aplikasi umum untuk USA INDUSTRIALSUSA INDUSTRIALS Produk
3G Electric memasok USA INDUSTRIALS schedule 40 threaded on both ends pipe with thread sealant. Kami menyediakan produk asli dengan ketersediaan tersedia di gudang untuk SKU umum, dokumentasi teknis, dukungan commissioning, dan layanan garansi — di seluruh dunia.
