Konten Lembar Data
LIGHT-OIL BURNERS TWO STAGES SK070084_B_en
FGP 100/2 EVO
Light-oil burners two stages.
Composed by: fan at high pressurisation at reverse blades, combustion head with adjustment at high efficiency and
high flame stability and hydraulic system of regulation combustive air on the two stages of flame.
Compact overall dimensions and disposition rationalized of the components with accessibility facilitated for
operations of setting and maintenance.
Complete of nozzle, flexible pipes and line filter.
Complete of flange and gasket for installation on generator.
Fig. 1 FGP 100/2 EVO
FGP 100/2 EVO
LIGHT-OIL BURNERS TWO STAGES SK070084_B_en
TECHNICAL DATA FGP 100/2 EVO
MODEL FGP 100/2 EVO
Flow min. 1°st. / min. 2°st. - max. 2°st. * [kg/h] 21.8/40-100
Thermal power min. 1°st. / min. 2°st. -max. 2°st. * [Mcal/h] 222.4/408-1020
Thermal power min. 1°st. / min. 2°st. -max. 2°st. * [kW] 258.6/474.4-1186
Fuel: LIGHT-OIL 1.5°E at 20°C = 6.2 cSt = 35 sec Redwood N°1
Intermitted working operation (min. 1 stop every 24 hours) two stages
Environmental conditions operation/storage: -15...+40°C / -20...+70°C, rel. humidity max. 80%
Max temperature combustion air [°C] 60
Nominal electric power [kW] 2.1
Fan motor [kW] 1.5
Pump motor [kW] 0.37
Nominal fan motor current absorption [A] 3.3
Nominal pump motor current absorption [A] 1.2
Nominal auxiliary absorption [A] 0.82
Power supply: 3~400V, 1N~230V - 50Hz
Electric protection degree: IP 40
Noisiness ** min-max [dB(A)] 82-83.6
Burner weight *** [kg] 52
* Reference conditions:Environment temperature 20°C - Barometric pressure 1013 mbars - Altitude 0 metre (sea level).
** Measured sonourous pressure in the combustion lab, with funcional burner on beta boiler in a distance of 1 m (UNI EN ISO 3746).
*** For burner with long head add 2 kg.
OPERATING RANGE DIAGRAM FGP 100/2 EVO
[mbar] 15
14 FGP 100/2 EVO
13
12
11
10
9
8
7
6
5
4
3
2
1
0
‐1
100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 [kW]
Fig. 2 X = Thermal power Y = Pression in the combustion chamber
The firing rates has been obtained based on test boilers in accordance with EN267 standards and are indicative of matching the burner to the boiler.
For the correct operation of the burner, combustion chamber dimensions must be in accordance with current regulation. In case of non-compliance,
contact the manufacturer.
FGP 100/2 EVO
LIGHT-OIL BURNERS TWO STAGES SK070084_B_en
DIMENSIONS [MM]
G
F
H C
E
A B TC - TL D
Fig. 3 Dimensions FGP 100/2 EVO
MODEL A B C D E F G H
FGP 100/2 EVO 411 294,5 175 766,5 510 140 290 280
* see "flame tube length"
FGP 100/2 EVO
LIGHT-OIL BURNERS TWO STAGES SK070084_B_en
BOILER PLATE
* Suggested dimension of connection between burner
and generator.
Fig. 4 Boiler plate
MODEL L min L max M N min N* N max
FGP 100/2 EVO mm 275 325 M10 185 185 220
FLAME TUBE LENGTH
Flame tube length must be selected based on the specifications supplied by boiler manufacturer and, in any case, it
must be greater than the thickness of the boiler door included its insulation.
In case of boilers with flame inversion or front flue combustion chambers, it is necessary to insulate the area between
the flame tube and front door with refractory material. This protection material must not impede flame tube extraction.
MODEL TC TL **
FGP 100/2 EVO mm 235 370
** For different flame lengths, please contact our Technical-Sales Department.
FGP 100/2 EVO
LIGHT-OIL BURNERS TWO STAGES SK070084_B_en
BURNER SIGNAL DESCRIPTION
In the picture below there are indicated all the signalation present on the burner:
1
2
Fig. 5 Burner signal description
LEGEND
1) ON/OFF button
2) Reset from lockout button + status lamp
The multicolor signal lamp in the lockout reset button (pos.2) is the key indicating element for visual diagnostics
and interface diagnostics.
In normal operation, the different operating states are indicated in the form of color codes; please refer to
electrical device handbook supplied with the present instructions.
After a non-alterable lockout, the red signal lamp in the lockout reset button (pos.2) lights up.
By pressing the lockout reset button (pos.2) for more than 3 seconds, the visual diagnostics of the cause of fault
can be activated; please refer to electrical device handbook supplied with the present instructions.
For close the diagnostics mode and for switch on the burner again, it is necessary to reset the burner control.
Press the lockout reset button (pos.2) for about 1 second (<3 seconds).
After a non-alterable lockout, the red signal lamp in the lockout reset button (pos.2) lights up.
For reset the control box press the lockout reset button (pos.2) for about 1 second (<3 seconds).
FGP 100/2 EVO
LIGHT-OIL BURNERS TWO STAGES SK070084_B_en
PRODUCT SPECIFICATION
SHORT DESCRIPTION
Light-oil burners two stages.
DETAILED SPECIFICATION
Light-oil burner two stages composed by:
• Fan at high pressurisation at reverse blades;
• Combustion head with adjustment at high performance and elevated flame stability;
• Flange and insulating gasket for fixing at boiler;
• Three-phase power supply;
• Photodiode for flame detection;
• IP 40 electric protection level;
• Safety air pressure switch to stop the burner in lock-out (by stopping the pump motor) in case of failed or anomalous fan
operation;
• Dedicated motor for the activation of the light-oil pump.
CONFORMING TO:
• CE rules;
• 2014/30/UE Directive E.M.C.;
• 2014/35/UE Directive L.V.;
• 2006/42/CE - 2006/42/EG - 2006/42/EC Directive M.D.;
• Directive PED 2014/68/UE (ART.4,PAR.3);
• Reference rules: EN267 (liquid fuel) - EN746-2 (industrial thermoprocessing equipment).
STANDARD EQUIPMENT
• Flexible hoses for connection;
• Line filter;
• Isomart gasket;
• Nozzle;
• Flange with insulating gasket;
• Burner nameplate;
• Warranty;
• Instruction handbook for installation, use and maintenance.
OPTIONAL
• Noise protection.
The illustrations and data here shown are indicative. F.B.R. Bruciatori S.r.l. reserves the right to bring, without any obligation of warning, any changes that would be appropriate to the continuing development of their products.
FGP 100/2 EVO
